dora-ulite6/dora-node.yml

# Node manifest: the typed contract a consumer wires against.
#
# No source package is shared between node repositories, so this file and its
# type URNs are the only contract a consumer has. `dora validate` checks a
# dataflow against it without running the node, so CI needs no robot.
#
# The `request` and `response` ports are deliberately **untyped**. They carry
# dora's pattern-correlation metadata (`request_id`), and dora defines that as
# the marker for a port where several Arrow schemas legitimately flow — one per
# service — distinguished by metadata rather than by a fixed Arrow type. The
# runtime skips type checks on such messages, so annotating them would claim a
# contract neither side keeps.
apiVersion: 1
name: dora-ulite6
namespace: liria
description: UFactory Lite6 arm node serving motion and control services, and publishing joint and tool pose
categories: [robot, actuator]
keywords: [ufactory, lite6, xarm, robot-arm, manipulator, service, vacuum, gripper]

runtime: python
entrypoint: dora-ulite6
# `dora build --uv` / `dora run --uv` rewrites this to `uv pip install .` and
# gives the node its own managed venv under `.dora/python-envs/`, so the
# dependencies it sees at runtime are the ones installed here.
build: pip install .
dora: ">=1.0"

inputs:
  tick:
    type: std/core/v1/UInt64
    required: true
    description: >-
      Each tick publishes whatever the arm threads produced since the last one.
      It does not drive the arm — the tick rate is the publication rate, and
      TELEMETRY_INTERVAL_MS is how often the arm is actually read. Connect to
      dora/timer/millis/N.
  request:
    required: true
    description: >-
      A service request: a one-row struct {service, ...arguments}, with the
      caller's `request_id` in the metadata. Services: move_to, move_joints,
      home, home_and_clear, clear, recover, stop, freedrive, grasp, release,
      get_state. Answered on `response` under the same request_id, exactly once.
      A motion takes `wait`: true (the default) holds the caller until the arm
      stops; false answers at once with an acknowledgement and reports the rest
      on `motion_state`.
  jog:
    required: false
    description: >-
      A continuous velocity command: a one-row struct {velocity} of 6 numbers
      [vx, vy, vz, wx, wy, wz] in mm/s and deg/s. A topic rather than a service
      because it expires on the controller's own TTL and a sender must keep
      sending; nothing is published in answer. It drives the arm, so the first
      non-zero one preempts a motion in play and robot_state turns to moving.

outputs:
  response:
    description: >-
      The answer to one service request, under its `request_id`: a struct
      {ok, service, message, ...extras}. get_state adds connected, ready,
      tool_engaged, freedrive, pose and joints. Exactly one response per
      request, including for one that was refused or preempted.
  motion_state:
    description: >-
      Where the current motion stands, published on every change: a struct
      {request_id, service, state, message} with state one of accepted, moving,
      done, failed, preempted. The request_id is in the fields rather than the
      metadata because this is the arm's state, not an answer to a request. A
      new motion preempts the one in play, so there is only ever one.
  joint_pose:
    type: std/core/v1/Float32
    description: The six joint angles in degrees, base to wrist.
  tcp_pose:
    type: std/core/v1/Float32
    description: >-
      The mounted tool's tip as [x, y, z, roll, pitch, yaw] in mm and degrees,
      in the robot base frame. With TOOL_TYPE none this is the flange itself.
  robot_state:
    type: std/core/v1/String
    description: >-
      One of connecting, ready, moving, recovering, unavailable. Published on
      every change, never repeated.

env:
  ROBOT_IP:
    type: string
    description: Controller address. Defaults to 192.168.1.192.
  TOOL_TYPE:
    type: string
    description: What is mounted at the flange - none, vacuum or gripper. Defaults to none.
  TOOL_OFFSET_MM:
    type: float
    description: Extra reach past the flange, added to the mounted tool's own. Defaults to 0.
  DEFAULT_SPEED:
    type: float
    description: Cartesian speed in mm/s for a move_to with no speed of its own. Defaults to 30.
  DEFAULT_JOINT_SPEED:
    type: float
    description: Joint speed in deg/s for a move_joints with no speed of its own. Defaults to 20.
  TELEMETRY_INTERVAL_MS:
    type: int
    description: >-
      How often the reporter reads the arm, and so how often telemetry is
      produced. Keeps running through a motion. Defaults to 100.
  RECONNECT_INTERVAL_S:
    type: float
    description: How long to wait before trying an unreachable arm again. Defaults to 5.
  INIT_MODE:
    type: string
    description: Where the arm goes on startup - none, home or pose. Defaults to none.

example: |
  - id: ulite6
    git: ssh://git@gitea.liria.cl:5001/liria/dora-ulite6.git
    tag: v0.3.0
    build: pip install .
    path: dora-ulite6
    inputs:
      tick: dora/timer/millis/100
      request: planner/request
    outputs:
      - response
      - joint_pose
      - tcp_pose
      - robot_state
    env:
      ROBOT_IP: "192.168.1.192"
      TOOL_TYPE: "vacuum"