dora-teleop/AGENTS.md

# AGENTS.md

This file provides guidance to AI coding assistants when working with code in this repository.

## What this is

A dora-rs Python node that gives a human control of a robot arm, from a gamepad or from a
web browser, and decides which of the two is driving.

It is **the piece in the middle and nothing else**, and it **touches no hardware at all**.
The arm is [`dora-ulite6`](https://gitea.liria.cl/liria/dora-ulite6), reached through that
node's ordinary `jog` and `request` ports. The browser is carried by
[`dora-websocket-transceiver`](https://gitea.liria.cl/liria/dora-websocket-transceiver).
The gamepad is [`dora-joy`](https://gitea.liria.cl/liria/dora-joy), which publishes raw
axes and buttons on `joy` and knows nothing about arms. Do not add any of the three here.
A teleop node that grew its own HTTP server is exactly the monolith `dora-ulite6` was
rewritten to get out of, and the pad was split out of this repo for the same reason: a
node whose job is policy should not carry a hardware dependency, and a pad nobody else can
reach is a pad that gets reimplemented.

**What stays here is everything about what a reading *means***: the deadzone, the response
curve, the layout (which button is grasp), and the mapping to base-frame mm/s and deg/s.
`dora-joy` publishes raw SDL and nothing else, so there is exactly one place shaping each
number.

The web console it serves is ported from `Littlehand/monolitic-littlehand-python`
(`littlehand/console/static/`), and **only its Control section**. Perception, calibration,
tasks, chat, ROI, settings and health belong to other nodes; porting them here would
rebuild the monolith inside a node.

## Build

```bash
uv sync              # runtime deps
uv sync --group dev  # plus pytest and ruff
```

## Run

```bash
dora run dataflow.yml --uv            # this node plus a bench stand-in, no pad
dora run dataflow-gamepad.yml --uv    # the same, with dora-joy pulled in by git:
```

`dataflow.yml` is self-contained on purpose — it resolves from this checkout alone, which
is what lets CI validate it. Keep it that way; the pad belongs in `dataflow-gamepad.yml`.

## Test

```bash
uv run pytest      # 112 tests, no gamepad, arm, browser or daemon needed
uv run ruff check .
uv run ruff format --check .
```

## Architecture

Two things carry the design: **what may touch the hardware**, and **what must happen when
a source goes away**.

- **`dora_teleop/main.py`** — The dora event loop, and the one decision this node exists
  to make: whether a velocity reaches the arm this tick, and from whom. **It never
  blocks.** `_drive` and `_wanted_velocity` are the safety-critical pair — every path that
  is not an owner actively asking for motion returns a stop, so a case nobody thought of
  fails by halting rather than by carrying on. Keep it that way: the default has to be
  "still".
- **`dora_teleop/joy.py`** — The pad as it arrives from `dora-joy`. `Sample.present` is
  the load-bearing field: an unplugged pad reads as *absent*, not as centred, so "the
  operator let go" and "the pad fell off the desk" stay distinguishable.
  **`JoyInput.read` is the other safety-critical function in this repo.** Moving the pad
  into another process added a way for it to go away that did not exist before — that
  process dying — and from here that looks like silence rather than like an unplugged pad.
  So silence past `JOY_TTL_S` reads as absent, which is the same answer. This works only
  because `dora-joy` publishes on every tick whether or not the pad moved; if that ever
  changes, this layer is gone and nothing here will say so.
- **`dora_teleop/message.py`** — The wire shapes, **declared and never inferred**.
  pyarrow types a struct from its first row, so `{"value": None}` is `null` and
  `{"value": 1.0}` is `double` — an inferred `command` would change its port's type
  between one verb and the next.
- **`dora_teleop/mapping.py`** — Stick deflection to base-frame velocity, and the layout
  that says which index is which. Pure functions, no state, no hardware, because this is
  the part that has to be right and the cheapest to check. Output is always the arm node's
  units: mm/s and deg/s, base frame. `is_active` lives here rather than on `Sample`
  because it needs the layout: **a trigger rests at -1.0**, so the pad-is-in-use test has
  to normalise triggers exactly as `velocity` does, or every connected pad reads as in use
  for ever and `GAMEPAD_IDLE_RELEASE_S` never fires.
- **`dora_teleop/arbiter.py`** — The lease. One place that answers "why did it not move",
  rather than one answer per input path. Ported from the monolithic repo's `RobotService`
  lease because the console's `app.js` is already built on it — it gates its jog pad on
  `t.owner === "web"` and draws an owner chip. A simpler last-writer-wins scheme would mean
  rewriting the page to match the node rather than the other way round.
- **`dora_teleop/ui.py`** — Translation both ways. The console's telemetry keys are a
  contract: `app.js` reads `arm_state`, `owner`, `estop`, `vacuum`, `freedrive`,
  `position`, `joints` by name, so renaming one breaks the page silently. `arm_state()` is
  where the arm's vocabulary (`connecting|ready|moving|recovering|unavailable`) is
  reconciled with the console's (`idle|moving|jogging|freedrive|estop|stopped|disconnected`).
- **`dora_teleop/config.py`** — Every environment variable, parsed once at startup, so an
  unusable setting stops the node before it joins the dataflow instead of surfacing the
  first time somebody picks up the pad. Errors name the variable. It also refuses deadman
  layers that are out of order, which is otherwise invisible until the day it matters.
- **`dora_teleop/log.py`** — Timestamped stderr logging. stderr because dora reads a
  dynamic node's stdout.
- **`examples/bench.py`** — A stand-in for the arm *and* the browser, so `dataflow.yml`
  is self-contained and CI can validate it with no sibling clones. **It is not a
  simulator** and must not become one: it never integrates a velocity or moves a pose. Its
  job is to close the loop so this node can be watched, not to stand in for
  `dora-ulite6` — anything needing the arm to actually respond needs the arm.
- **`dora_teleop/probe.py`** — `dora-teleop-probe`: a **dynamic node** that attaches to a
  running dataflow, reads the same `joy` stream this node reads, and shows the raw axes,
  the buttons and the velocity that would be sent. It exists because the indices in
  `mapping.py` are SDL's documented layout rather than an observed one, and a pad that
  disagrees is otherwise found by watching a real arm move the wrong way. It goes through
  the same `velocity()` the node runs, on the same readings, so what it prints is what the
  arm would get — keep it that way, or it stops being evidence. `dataflow-gamepad.yml`
  declares it as `path: dynamic`. For a pad whose layout is unknown, `dora-joy-probe`
  needs no dataflow at all.

## The standard, and why it is one

This node publishes `twist` (SI) and `command` (robot-agnostic verbs), not one robot's
vocabulary. The contract is in the vault at `resources/robotics/teleop-contract.md`, which
is where it lives because no source package is shared between node repositories.

**Normalise first, scale once.** Every control source becomes a `[-1, 1]` six-vector
before anything is scaled, and the scaling happens in exactly one function. The deadzone
and the response curve are applied only to the gamepad, because they correct a worn
physical stick and a browser has none. Break this and the console silently acquires the
robot's units, which is what it used to have and the reason it fitted only one arm.

`jog` and `request` still carry the same intent in `dora-ulite6`'s units and service
names. They are deprecated, exist so the two repositories can move independently, and go
away once the arm node takes the standard ports. `LEGACY_REQUEST` in `main.py` is the only
place that knows what that node calls a verb.

`joint_jog` is specified in `dora-node.yml` and deliberately **not implemented**. A
joint-space robot needs IK and position integration against joint limits, neither of which
belongs here, and a port nothing wires reads as supported while having never run.

## Rules that are not negotiable

- **The stop is sent once, not every tick.** A stream of zero velocities keeps
  `dora-ulite6` believing a jog is live and holds `robot_state` at `moving` forever.
- **E-STOP is never gated on the lease, and neither is its release.** From either
  source, at any time. The latch (`view.estop`) is checked first in
  `_wanted_velocity`, above the owner — a stop that the next stick movement overrides is
  not a stop. `_clear` is the only way out and does both halves, this node's latch and the
  controller's error; the pad's X and the console's RESET both go through it, so a
  pad-only dataflow is not left with a latch nothing can release.
- **The deadman layers must stay in order**: `JOY_TTL_S` (0.2) < `JOG_TTL_S` (0.4) < the
  arm node's `VELOCITY_COMMAND_TTL_S` (0.5). Each is the backstop for the one inside it,
  and a backstop that fires first backs up nothing. `Config.from_env` enforces the first
  pair; nothing can enforce the second from here.
- **An unplugged pad, a dead `dora-joy` or a departed browser stops the arm immediately**,
  without waiting out any timer beyond the one that detects it.
- **Both control sources go through `mapping`.** The web path used to bypass it and pass
  a velocity straight through, which is why the console had to speak mm/s. One conversion
  point or none.
- **Declare every published Arrow schema.** See `message.py`.
- **Do not reintroduce a web server, a robot driver or a gamepad driver here.** See above.
  In particular: no `pygame`, no `evdev`, and no environment variable naming a device.

## What this node cannot do

The lease binds only what goes through this node. `dora-ulite6` has no concept of an owner,
so another node publishing `request` will preempt an operator mid-motion and nothing here
can prevent it. Say so rather than implying otherwise.

`jog` has no feedback channel at all — a malformed one is logged and dropped by the arm
node, with no response and no error output. What this node sends, it learns nothing back
about except through `robot_state` and telemetry.

## Two manifest rules worth knowing

`dora-node.yml` is the typed contract a consumer wires against, and the only one they get:
no source package is shared between node repositories. `dora validate` checks a dataflow
against it without running the node, so CI needs neither a gamepad nor a robot.

`joy`, `jog`, `request`, `response`, `motion_state` and the `ui_` ports are deliberately
**untyped**. dora treats a port carrying `request_id` as pattern-correlated and skips type
checks on it, several Arrow schemas legitimately flow over each, and dora 1.0 ships no
standard joystick type. Annotating them would claim a contract neither side keeps.

## Key APIs

- **dora Python API** (`dora`): `Node()`, `node.send_output(id, array, metadata)`, event
  iteration via `for event in node`.
- **The `joy` message** (`dora-joy`): the Arrow struct
  `{axes: list<float32>, buttons: list<bool>, present: bool}`, published on every tick.
  Raw SDL — a stick centres near 0, but **a trigger rests at -1.0**. There is no header
  and no timestamp: freshness is arrival time here.

## Tools

- **Issue tracker:** Gitea. Use the Gitea MCP tools (`mcp__gitea__*`) to read and manage
  issues, pull requests, and other repository operations.

## Code style

- Write docstrings in NumPy style (summary line, then `Parameters`, `Returns`, `Raises`
  sections as needed).
- Run `ruff check .` and `ruff format .` before committing. CI enforces both.

## Rules

- Do not mention AI tools in commit messages or documentation.