An Xbox One S pad over Bluetooth numbers its controls differently from the indices this node shipped with: the right stick is on axes 2 and 3, the triggers on 4 and 5, and the buttons carry gaps at 2 and 5. Against the old layout an untouched pad reported a resting trigger as full right-stick deflection, which asked for 30 deg/s of pitch while lying on the desk, held the lease for ever so GAMEPAD_IDLE_RELEASE_S never fired, and moved a real arm into a controller error. X toggled freedrive and LB was the E-STOP, so the resulting latch could not be released from the pad at all. Layout now carries the swept indices. Each pad is also measured the first time it is seen at rest: a stick must rest near centre and a trigger near the bottom of its travel, and a pad that does not fit reads as absent and is named in the log rather than driving an arm from a numbering nobody checked. The measured rest becomes each axis's zero, so a worn stick's tilt is subtracted rather than deadzoned away and a trigger that reads 0 until it first moves stops reading as half pressed. Rest is never re-measured while the pad is in use, because doing that under a held stick would record the deflection as centre and the arm would move when the operator let go. The probe drives from the same calibration, so what it prints is still what the arm would get, and it shows the mismatch. Tests name their controls through axes_for and buttons_for instead of numbering them; the positional lists are why a wrong index passed a green suite.
166 lines
5.3 KiB
Python
166 lines
5.3 KiB
Python
"""Shared fakes. Nothing here needs a gamepad, an arm, a browser or a daemon."""
|
|
|
|
import json
|
|
|
|
import pyarrow as pa
|
|
import pytest
|
|
|
|
from dora_teleop.config import Config
|
|
from dora_teleop.joy import Sample
|
|
from dora_teleop.mapping import LAYOUT, TRIGGER_REST
|
|
|
|
# The shape `dora-joy` publishes. Declared here rather than inferred for the same
|
|
# reason it is declared there: pyarrow reads an empty `axes` list as `list<null>`,
|
|
# so a test for an absent pad would otherwise build a message no consumer sees.
|
|
JOY = pa.struct(
|
|
[
|
|
("axes", pa.list_(pa.float32())),
|
|
("buttons", pa.list_(pa.bool_())),
|
|
("present", pa.bool_()),
|
|
]
|
|
)
|
|
|
|
|
|
class RecordingNode:
|
|
"""A dora node that records outputs *with* their metadata.
|
|
|
|
`dora.testing.MockNode` drops the metadata dict on `send_output`, and the
|
|
metadata is where `request_id` rides. So the tests record it themselves.
|
|
"""
|
|
|
|
def __init__(self):
|
|
self.sent = []
|
|
|
|
def send_output(self, output_id, data, metadata=None):
|
|
self.sent.append((output_id, data, dict(metadata or {})))
|
|
|
|
def outputs(self, output_id):
|
|
"""Return every message sent on ``output_id`` as (value, metadata) pairs."""
|
|
return [(data[0].as_py(), metadata) for name, data, metadata in self.sent if name == output_id]
|
|
|
|
def jogs(self):
|
|
"""Return every velocity sent on the deprecated `jog` port, in order."""
|
|
return [row["velocity"] for row, _ in self.outputs("jog")]
|
|
|
|
def twists(self):
|
|
"""Return every Twist sent on the standard port, in order."""
|
|
return [row for row, _ in self.outputs("twist")]
|
|
|
|
def actions(self):
|
|
"""Return the verb of every standard `command`, in order."""
|
|
return [row["action"] for row, _ in self.outputs("command")]
|
|
|
|
def services(self):
|
|
"""Return the name of every service called, in order."""
|
|
return [row["service"] for row, _ in self.outputs("request")]
|
|
|
|
def ui(self):
|
|
"""Return every object handed to the bridge, parsed."""
|
|
return [json.loads(value) for value, _ in self.outputs("ui_state")]
|
|
|
|
def clear(self):
|
|
self.sent.clear()
|
|
|
|
|
|
def stick(axes=None, buttons=None, present=True):
|
|
"""Build one gamepad reading, padded to a full six axes."""
|
|
values = list(axes or [])
|
|
values += [0.0] * (6 - len(values))
|
|
# A trigger at rest reads -1, and a test that forgot to say so would look
|
|
# like both triggers held down. Which indices those are comes from the
|
|
# layout, so a test never has to be edited when a pad renumbers them.
|
|
for index in (LAYOUT.left_trigger, LAYOUT.right_trigger):
|
|
if axes is None or index >= len(axes):
|
|
values[index] = -1.0
|
|
return Sample(axes=values, buttons=list(buttons or []), present=present)
|
|
|
|
|
|
def axes_for(
|
|
left_x=0.0,
|
|
left_y=0.0,
|
|
right_x=0.0,
|
|
right_y=0.0,
|
|
left_trigger=TRIGGER_REST,
|
|
right_trigger=TRIGGER_REST,
|
|
):
|
|
"""Lay out a pad's axes by what each control is rather than by its index.
|
|
|
|
A test that numbers its axes says nothing about which control it meant, and
|
|
goes on passing while meaning something else once a pad renumbers them.
|
|
"""
|
|
values = [0.0] * 6
|
|
values[LAYOUT.left_x] = left_x
|
|
values[LAYOUT.left_y] = left_y
|
|
values[LAYOUT.right_x] = right_x
|
|
values[LAYOUT.right_y] = right_y
|
|
values[LAYOUT.left_trigger] = left_trigger
|
|
values[LAYOUT.right_trigger] = right_trigger
|
|
return values
|
|
|
|
|
|
def buttons_for(
|
|
grasp=False, release=False, clear=False, freedrive=False, yaw_left=False, yaw_right=False, estop=False
|
|
):
|
|
"""Lay out a pad's buttons by what each one does rather than by its index.
|
|
|
|
The same reason as :func:`axes_for`, and more pressing: an unpressed button
|
|
reads identically on every pad, so a test that numbers them is the only
|
|
place a wrong index could ever have been caught.
|
|
"""
|
|
wanted = {
|
|
LAYOUT.grasp: grasp,
|
|
LAYOUT.release: release,
|
|
LAYOUT.clear: clear,
|
|
LAYOUT.freedrive: freedrive,
|
|
LAYOUT.yaw_left: yaw_left,
|
|
LAYOUT.yaw_right: yaw_right,
|
|
LAYOUT.estop: estop,
|
|
}
|
|
return [wanted.get(index, False) for index in range(max(wanted) + 1)]
|
|
|
|
|
|
def joy_message(sample):
|
|
"""Build the Arrow row `dora-joy` would publish for one reading."""
|
|
return pa.array(
|
|
[
|
|
{
|
|
"axes": [float(value) for value in sample.axes],
|
|
"buttons": [bool(down) for down in sample.buttons],
|
|
"present": sample.present,
|
|
}
|
|
],
|
|
type=JOY,
|
|
)
|
|
|
|
|
|
def input_event(event_id, value, metadata=None):
|
|
"""Build the event dict dora hands a node for one input."""
|
|
return {"type": "INPUT", "id": event_id, "value": value, "metadata": dict(metadata or {})}
|
|
|
|
|
|
@pytest.fixture(autouse=True)
|
|
def clean_env(monkeypatch):
|
|
"""Run every test against a bare environment, whatever the shell set."""
|
|
for name in (
|
|
"SPEED_MM_S",
|
|
"SPEED_DEG_S",
|
|
"DEADZONE",
|
|
"EXPO",
|
|
"JOG_TTL_S",
|
|
"JOG_KEEPALIVE_S",
|
|
"JOY_TTL_S",
|
|
"GAMEPAD_IDLE_RELEASE_S",
|
|
"STATE_POLL_S",
|
|
"WEB_HOST",
|
|
"WEB_PORT",
|
|
):
|
|
monkeypatch.delenv(name, raising=False)
|
|
|
|
|
|
@pytest.fixture
|
|
def config():
|
|
"""Return the default configuration, with expo off so a test can do the arithmetic."""
|
|
built = Config.from_env()
|
|
built.expo = 0.0
|
|
return built
|